Clear Coat?

I'm clear coating a faring for a new Harley. I'm using factory matched paint. I plan on putting three to six coats of house of colors clear coat on it. What presure should I spray the clear coat at? Any suggestions on a nozzel size for the air brush, and when should I wet sand it, or should I just use buffing compound on it after all three to six coats are on the faring?Clear Coat?
Remember that the higher the pressure the more you risk runs. But if you dont have enough pressure it will clump and clog the nozzle, try a ';Mirrioraze 1.265 mm'; nozzle. and definately set the pressure at 30psi no more than 40psi. Also, buff after the coats have all been applied :-) hope this helps cutie!